Re-pair Bluetooth connection

Re-pairing the Bluetooth connection is usually only required if Smooth scrolling is not initialized, which can happen if you wake up your computer from sleep.

In case the re-pairing process fails, use Restart device driver from the Driver menu instead. You can configure the default action in the Bluetooth driver settings.

Re-pairing the Bluetooth connection is usually only required if Smooth scrolling is not initialized, which can happen if you wake up your computer from sleep.

In case the re-pairing process fails, use Restart device driver from the Driver menu instead. You can configure the default action in the Bluetooth driver settings.

Prerequisites

Re-pairing works only if the device has an active Bluetooth connection established.

The Magic Utilities can't re-pair a device automatically which is turned off or was paired to another computer in the meantime.

The re-pairing process

The process consists of three automatic steps.

Remove the paired Bluetooth device.
Pair the device again as a Bluetooth device.
Wait until the device becomes active.

During this time, a wait dialog indicates the individual steps.

If one step fails, the remaining steps cannot be completed automatically.

Re-pair the device manually

In case Remove or Pair fail, you have to complete the remaining steps manually.

Remove the device from Windows devices

Windows 11

Open Windows Settings > Bluetooth & devices > View more devices.
At your listed device, click on the three-dot menu.
Click Remove device.
Wait about 10 seconds until Windows has removed thedevice.

Windows 10

Open Windows Settings > Devices.
Click on your listed device.
Click Remove device and confirm with Yes.
Wait about 10 seconds until Windows has removed the device.

Pair as a Bluetooth device

For full instructions on Bluetooth pairing, click here.

Wait until the device becomes active

The waiting time on manual repairing is usually negligible and takes only a few seconds.